Special Programming Mode (SPM)
36
➌
To exit this menu, select another menu item by
turning the Channel Selector Knob (2).
NOTE
The Battery Saver feature is not active during chan-
nel scanning, when the
Push-To-Talk (PTT) Button
(6)
is pressed, or when the radio is receiving a sig-
nal.
Setting the Battery Type
➊
In SPM, rotate the Channel Selector Knob (2) to
the Set Battery Type (
- Alkaline (standard
battery) or - NiCd (rechargeable battery))
menu.
➋
Use the or
(or )
to scroll through the
three options.
CAUTION
The new setting is stored immediately.
➌
To exit this menu, select another menu item by
turning the Channel Selector Knob (2).
IMPORTANT
The
Battery Type
must be correctly set for
Low Bat-
tery Alert
to perform accurately.
Setting the Accessory Sense Option
This menu item determines the type of accessory in
use by the radio (if any), such as a headset, earpiece,
or speaker microphone. There are three options avail-
able:
Autosense
,
Headset Only
and
Speaker Micro-
phone Only
.
ME
To Next Page
Loading...
