Motorola IMPRES 2 Adaptive Unit User Manual

25
English
Charger Setup Menu Selection
Pressing OK displays the options available within the Charger Setup
Menu.
• Press the Right Arrow to sequence through the Setup Menu Options
as represented.
• Press then Left Arrow to sequence through the Setup Menu Options
in reverse order.
Press OK to enter the Setup Menu for the Charger Setup Menu Option
currently displayed. Within the Setup Menu:
• Press the Right Arrow to sequence through the Options as
represented.
• Press the Left Arrow to sequence through the Options in reverse
order.
• Check mark identifies the current Option selection.
• Pressing OK either removes the Check mark from a selected Option
or adds the Check mark to select an Option.
• Press Back to exit from the Setup Menu. Press OK to confirm exit.
Press Back to exit from Charger Setup mode. Press OK to confirm exit.
Charger Setup selections are stored in non-volatile memory. Selections
are not affected by cycling charger power.
MN002407A01.book Page 25 Thursday, February 16, 2017 3:18 PM

Motorola IMPRES 2 Adaptive Unit Specifications

General

Model	IMPRES 2 Adaptive Unit
Type	Battery Charger
Compatibility	Motorola IMPRES batteries
Voltage	7.4V
Input Voltage	100-240V AC
LED Indicators	Yes
Chemistry	Li-ion