Motorola IMPRES 2 Adaptive Unit User Manual

32
English
Power Saver Menu
To meet certain government low standby power limits, Power Saver
mode enables the charger to turn off Pocket #2 through Pocket #6
when there is no activity in those pockets for a period of time.
Examples of activity include the following:
• Radio or battery charging.
• Battery Calibration / Reconditioning.
• Lithium-ion Battery preparation for shipment.
• Battery preparation for Long-Term Storage.
• Charger Setup Mode.
• Charger Analysis Mode.
•Fault.
• Recommending Calibration / Reconditioning.
Pocket #1 remains on, but may be sleeping. To turn on Pocket #2
through Pocket #6, press any Keypad button. Until Pocket #2 through
Pocket #6 are turned on, they cannot respond to radio or battery
insertion, or removal.
MN002407A01.book Page 32 Thursday, February 16, 2017 3:18 PM

Motorola IMPRES 2 Adaptive Unit Specifications

General

Model	IMPRES 2 Adaptive Unit
Type	Battery Charger
Compatibility	Motorola IMPRES batteries
Voltage	7.4V
Input Voltage	100-240V AC
LED Indicators	Yes
Chemistry	Li-ion