14
English
English
5. Press the toggle button again to exit the test
mode.
Note: Each CDM operates independently. If
more than one CDM is installed in a charger,
the test mode sequence can be run for each
individual CDM.
GENERAL DISPLAY INFORMATION
The Charger Display Module (CDM) is designed to
provide the user with valuable information while
performing battery maintenance and care. Below
details the information the CDM will display along
with the corresponding LED indicator.
Start Up
Upon Charger Power-up
LED SINGLE FLASH GREEN
Line 1 IMPRES
Line 2
If There is No Battery in Pocket
LED OFF
Line 1 NO BATTERY
Line 2
CDM_Install - B.fm Page 14 Monday, February 10, 2003 2:51 PM
To Next Page
Loading...
