Motorola IMPRES - Operating Instructions; Charging Procedure

5
English
English
CHARGER COMPATIBILITY
The Charger Display Module (CDM), P/N
RLN5382, can be installed in any of the following
existing IMPRES Adaptive Multi-Unit Chargers:
WPLN4108 WPLN4119
WPLN4109 WPLN4120
WPLN4110 WPLN4121
WPLN4118 WPLN4123
In addition, the CDM can be installed as a
replacement for any of the following IMPRES
Adaptive Multi-Unit Chargers with displays:
WPLN4127 WPLN4133
WPLN4130 WPLN4134
WPLN4131 WPLN4135
WPLN4132 WPLN4136
CHARGER DISPLAY MODULE INSTALLATION
It is recommended that qualified self-maintained
users, independent service shops, or the Motorola
Service Depot complete installation of the CDM.
To quickly and easily install the CDM, refer to the
diagrams and information in the steps that follow.
Required Tools:
• Torque driver capable of delivering 8 and
10 in-lbs
• #10 Torx bit, P/N 6680387A74
• #20 Torx bit, P/N 6680387A76
CDM_Install - B.fm Page 5 Monday, February 10, 2003 2:51 PM