Motorola MC75A - Quick Start Guide Manual

MC75A
6
11
4
5
1
2
3
7
9
10
18
17
16
27
29
13
14
15
20
25
26
24
23
12
28
19
22
21
1
2
3
4
Follow the on-screen ActiveSync instructions to
establish a connection between the MC75A and the
host computer.
Create a Partnership
5
Four Slot Cradle
FEATURES KEYPADS
Insert the Battery
1
Charge the MC75A
2
Install ActiveSync
®
3
Communicate with Host
4
Single Slot Cradle
Slow Blinking Amber = Charging
Charging/Battery Status LED
Solid Amber = Fully Charged
*
It is recommended that this product be charged for 24 hours before the first use
to ensure that the internal battery is fully charged.
GETTING STARTED
Fast Blinking Amber = Charging Error
9 Scan/Decode LED
10 Charging/Battery
Status LED
11 Radio Status LED
(MC75A6/8 only)
12 Receiver
5 Keypad
6 Scan/Action Button
7 Touch Screen
(with screen protector)
8 Power Button
1 Scan/Action Button
2 Up/Down Button
3 Microphone
4 I/O Connector
Note 1: To reset the MC75A, press and hold the Power button for five (5) seconds. Note 3: 3600 mAh Battery and Door shown.Note 2: See the MC75A User Guide for detailed keypad information.
Charging/Battery Status LED
Download ActiveSync
®
4.5 or higher from
http://www.microsoft.com and follow the
instructions to install ActiveSync onto the host
computer.
13 Battery Door
14 Handstrap
15 Handstrap Slot
16 Headset Jack
17 Camera Flash (optional)
18 3.2 Mpixel Camera
(optional)
24 Scan/Action Button
25 Action Button
26 Back Housing Bracket
27 Memory Card Cover
28 IrDA Window
29 Door Latch
19 Speaker
20 Scan Window
(see Data Capture Options)
21 Antenna
22 Stylus
23 Tether Point
Quick Start Guide
Blue Key
>
Orange Key
Use this key to access the secondary layer of characters and actions.
> Press the orange key once to lock the keypad in the Alpha state.
> Press the orange key a second time to return to the normal state.
Blue Key
Orange Key
Press the Blue key once to activate this state temporarily, followed by another key.
Press the Blue key twice to lock this state.
Press the Blue key a third time to unlock.
Press the Orange key once to activate this state temporarily, followed by another key.
Press the Orange key twice to lock this state.
Press the Orange key a third time to unlock.
Use this key to access function keys shown on the keypad in blue.
Use this key to access the secondary layer of characters and actions.
>
>
>
>
>
>
Use this key to access function keys shown on the keypad in blue.
Press the blue key once to activate this mode followed by another key.
DSD KeypadNumeric Keypad
Alphanumeric Keypad
24hr*
8
(Note 1)