How to fix Motorola MC75A PDA that does not turn on?
If your Motorola PDA (MC75A) doesn't turn on, it might be due to a few reasons. First, ensure the battery is charged or replace it if necessary. Another possibility is that the battery isn't installed correctly, so try reinstalling it properly. Lastly, a system crash could be the cause; in this case, attempt a warm boot. If that doesn't work, try a cold boot.
What to do if Motorola MC75A PDA rechargeable battery did not charge?
If the rechargeable battery of your Motorola PDA (MC75A) isn't charging, there could be a few reasons. It's possible the battery has failed and needs replacing. If that doesn't solve the issue, try a warm boot, followed by a cold boot. Also, ensure that the device remains in the cradle while charging. Finally, extreme temperatures can prevent charging; the battery won't charge if the ambient temperature is below 0°C (32°F) or above 40°C (104°F).
Why does my Motorola MC75A PDA keep powering down?
The Motorola MC75A might be shutting off to protect memory contents because its battery is low. Try recharging the battery. Also, the internal Bluetooth radio, if powered on for a long time, can drain the battery. Power it off when not needed by using the SetDeviceState() API to set the Bluetooth to D4 power state.
What to do if my Motorola PDA MC75A does not turn on?
The Motorola MC75A PDA might not be turning on because the lithium-ion battery is not charged. In this case, charge or replace the lithium-ion battery. Another reason might be that the lithium-ion battery is not installed properly. Make sure that the battery is installed properly. It is also possible that the system crashed. If so, perform a warm boot. If the MC75A still does not turn on, perform a cold boot.
Why does my Motorola MC75A PDA shut off by itself?
The Motorola MC75A PDA might shut off because it is inactive. If the MC75A is running on battery power, set the inactivity period from 1 to 5 minutes, in one-minute intervals. If running on external power, set this period to 1, 2, 5, 10, 15, or 30 minutes. Check the Power window by selecting Start > Settings > System tab and tapping the Power icon. Select the Advanced tab and change the setting for a longer delay before the automatic shutoff feature activates. The battery might not be inserted properly. Insert the battery properly. The battery might also be depleted, so replace the battery.
How to fix 'Memory is full' message on Motorola MC75A PDA?
The Motorola MC75A PDA might display a message stating that the memory is full because too many files are stored on the device. Delete unused memos and records. If necessary, save these records on the host computer (or use an SD card for additional memory). Also, too many applications might be installed on the MC75A. Remove user-installed applications on the MC75A to recover memory by selecting Start > Settings > System tab and tapping the Remove Programs icon. Select the unused program and tap Remove.
What to do if tapping icons doesn't work on Motorola MC75A PDA?
If tapping the window buttons or icons on your Motorola MC75A PDA does not activate the corresponding feature, the screen might not be calibrated correctly. Re-calibrate the screen. Also, the system might not be responding. Warm boot the system.
Why is data not transmitted or incomplete during data communication on my Motorola PDA?
If your Motorola PDA (MC75A) is experiencing issues with data communication, such as no data being transmitted or incomplete data transfer, there are a few potential causes. Check that the MC75A wasn't removed from its cradle or disconnected from the host computer during communication; if so, replace it in the cradle or reattach the communication cable and re-transmit. If the issue persists, consult the system administrator, because the problem may be in the incorrect cable configuration.
Why is my Motorola MC75A PDA rechargeable lithium-ion battery not charging?
The rechargeable lithium-ion battery in your Motorola MC75A PDA may not be charging because the battery has failed. Replace the battery. If the MC75A still does not operate, perform a warm boot, then a cold boot. The MC75A might have been removed from the cradle while the battery was charging. Insert the MC75A in the cradle. The 3600 mAh battery fully charges in less than six hours. The battery might not charge if the ambient temperature is below 0°C (32°F) or above 40°C (104°F).
Why is data not transmitting correctly on my Motorola MC75A PDA?
During data communication, if no data is transmitted, or transmitted data was incomplete on your Motorola MC75A PDA, the MC75A might have been removed from the cradle or disconnected from the host computer during communication. Replace the MC75A in the cradle, or reattach the communication cable and re-transmit. The cable configuration might be incorrect. In this case, see the system administrator. The communication software might be incorrectly installed or configured. Perform setup.
General| Operating System | Windows Mobile 6.5 |
|---|---|
| RAM | 128 MB |
| Processor | Marvell PXA320 |
| Camera | 3.2 MP |
| Connectivity | Wi-Fi, Bluetooth |
| Data Capture | 1D/2D Barcode Scanner |
| Expansion Slot | microSD |
| Durability | IP54 |
| GPS | Integrated GPS |
| Storage | 256 MB |
| Battery | 3600 mAh Li-Ion |
To Next Page
