Motorola MC75A - Services; Call Barring (Call Blocking); Caller ID; Call Forwarding

6 - 14 MC75A Enterprise Digital Assistant Integrator Guide
Figure 6-20 Phone Window - Version Information Tab
2. Tap ok to exit settings.
Services
Depending on the type of subscribed phone services, the following services may be available: call barring, caller
ID, call forwarding, call waiting, voice mail and Short Message Service (SMS).
Call Barring (Call Blocking)
Call barring blocks certain types of incoming and/or outgoing calls. This service is setup when an account is
opened with the service provider.
Caller ID
Caller ID provides a way for people to know the identity of the person making an outgoing call. To disable caller ID
and block the outgoing phone number:
1. Enter *67 on the phone keypad.
2. Enter the phone number to call.
Call Forwarding
Use call forwarding to forward incoming calls to a different phone number. To enable call forwarding and send calls
to another phone number:
1. Enter *72 on the phone keypad.
2. Enter the area code and phone number of the phone to accept the forwarded calls.
3. Tap Talk.
4. A beep sounds indicating activation.
5. Tap End.
NOTE *67, followed by the phone number, must be entered on a call-by-call basis to block the outgoing phone
number.
NOTE Call Forwarding may not be available on all networks. Check with your service provider for availability.