7 - 4 MC75A Enterprise Digital Assistant Integrator Guide
Figure 7-4
Set IST Sensitivity Window
Display Tab
Use the Display tab configure display interaction settings.
Figure 7-5
Display Tab
The Auto Orientation parameter controls the display rotation according to the MC75A orientation. Select the Auto
radio button to enable this feature. Auto orientation is disabled by default.
Select the Manual radio button to manually select screen orientation. Tap the Setting button to display the Screen
Orientation window. Select the orientation and then tap OK.
Event Log Tab
Use the Event Log tab to display the event details. This feature in IST mainly focuses on abuse by dropping the
device.
To Next Page
Loading...
