Motorola MOTOTRBO XiR P8668 - 3.4 Display Model Test Mode; 3.4.1 Monochrome Display Test; 3.4.2 Color Display Test

Transceiver Performance Testing Display Model Test Mode 3-11
- Press BACK, “129/1” appears & radio beeps; release, “129/0” appears & radio beeps.
- Press
W, “128/1” appears & radio beeps; release, “128/0” appears & radio beeps.
- Press
X, “130/1” appears & radio beeps; release, “130/0” appears & radio beeps.
- Press ▲, "135/1" appears & radio beeps; release, "135/0" appears & radio beeps.
- Press
▼, "136/1" appears & radio beeps; release, "136/0" appears & radio beeps.
3.4 Display Model Test Mode
3.4.1 Monochrome Display Test
1. Press any button to test the LCD display, press button ">" until the display are fixed. Then,
press and hold the first side button until the screen change.
2. Upon any button/key press, the LCD shall display the growing horizontal bars. Press button
X until the LCD display full screen in Black and change to vertical bars.
3. Press button
X until the LCD display full screen Black and change to icon display.
4. The LCD shall display RSSI icon (with full bar), monitor icon, high power level icon (H), tone
disabled icon, priority-two channel scan icon, option board icon, unread message icon,
emergency icon, talkaround icon, and battery strength indicator icon (with full bar).
5. The LCD shall clear the screen and display the rest of the icons (low power level icon (L),
companding icon, and secure operation icon) upon any button/key press.
6. Then, press and hold the first side button until the screen change.
3.4.2 Color Display Test
1. Press any button to test the LCD display, press button X until the display are fixed. Then,
press and hold the first side button until the screen change.
2. Upon key
Xpress, the housing shall display a White screen with 2 pixels wide of a black
border inset from the edge by 2 pixels and the text "Display Test Mode" in black.
3. Upon key
Xpress, the housing shall display a Black screen with 2 pixels wide of a White
boarder inset from the edge by 2 pixels and the text "Display Test Mode" in White.
4. Upon key
Xpress, the housing shall display a full screen in Red.
5. Upon key
Xpress, the housing shall display a full screen in Green.
6. Upon key
Xpress, the housing shall display a full screen in Blue.
7. Upon key
Xpress, the housing shall display the growing horizontal bars with a cyclic color of
Red>Green>Blue>Black>Red>Green>Blue>Black>Red (Full Screen).
8. Upon key
Xpress, the housing shall display the growing vertical bars with a cyclic color of
Red>Green>Blue>Black>Red>Black (Full Screen).
9. Upon key “>”press, until all icons in color show. The housing shall display RSSI icon (with full
bar), monitor icon, high power level icon (H), tone disabled icon, priority-two channel scan
icon, option board icon, unread message icon, emergency icon, talkaround icon, and battery
strength indicator icon (with full bar).
10. The housing shall clear the screen and display the rest of the icons in color, (low power level
icon (L), companding icon, and secure operation icon) upon key “>”press. Then, press and
hold the first side button until the screen change.