5-26 Disassembly/Reassembly Procedures: Radio Reassembly - Detailed
5.7.4 Chassis and Front Cover Reassembly
1. Connect the flex to the main board and the keypad board.
2. Insert top chassis tabs into the recesses on front cover and the tabs are fully inserted.
3. Gently push down the chassis into the front cover until it snaps in place.
4. Align the shroud with the top of the front housing and slide it in place.
5. Insert knobs, antenna and battery.
Figure 5-23. Chassis reassembly
Shroud
To Next Page
Loading...