Chapter 4 Radio Programming and Tuning
4.1 Introduction
This chapter provides an overview of the MOTOTRBO Customer Programming Software (CPS), as
well as the Tuner and AirTracer applications, which are all designed for use in a Windows 2000/XP/
Windows 7 environment. These programs are available in one kit as listed in Table 4-1. An
Installation Guide is also included with the kit.
4.2 Customer Programming Software Setup
The CPS programming setup, shown in Figure 4-1 is used to program the radio.
Figure 4-1. CPS Programming Setup
NOTE
Refer to the appropriate program on-line help files for the programming procedures.
Table 4-1. Software Installation Kits Radio Tuning Setup
Description Part Number
MOTOTRBO CPS and AirTracer on CD-ROM PMVN4130_
MOTOTRBO Tuner on CD-ROM PMVN4131_
NOTE
Refer to appropriate program on-line help files for the programming procedures.
Computer USB ports can be sensitive to Electrostatic Discharge. Do not touch
exposed contacts on cable when connected to a computer.
!
C a u t i o n
Radio
Battery
Programming, Testing
& Alignment Cable
PMKN4012B
PMKN4013C or later.
To Next Page
Loading...