Installation 43
Connection of ALPR Cameras
The ALPR Splitter Cable enable interfacing up to four PIPS ALPR cameras (P632 with
LVDS interface) installed on a vehicle. For detailed installation and calibration procedure,
camera cables and mounts, refer to PIPS Technology at: http://www.pipstechnology.com/.
For cable connections to the CPU box, refer to Figure 29.
USB
AUX
AUX
W-WAN
MAIN
SERIAL 1
MAIN
AUX
W-LAN
LAN
DISPLAY 1
GPS
ON
OFF
PWR
Mic InMic
In
Audio OutAudio
Out
ALPR
USB
LAN
LAN
DISPLAY 2
Figure 29
Connection of MW810 Mobile Workstation Auxiliary Port to Vehicle Wiring
J1
P1
MW810 Mobile Workstation CPU Box
Use the Light bar
cable route to route
the camera cables.
ALPR Splitter Cable
Twisted-pair cable (not included)
with overall shield with metal
IP67-sealed connectors,
Standard length 16.4 feet (5
meters). Greater lengths include
optional use of cable
incorporating coaxial video.
PIPS ALPR Camera
To Next Page
Loading...
