Motorola MW810 - Vertical Installation - Back Panel Facing up

Appendix A Installation, Configuration and Calibration of GPS Dead Reckoning 45
Vertical Installation - back panel facing up
Front Panel
Step 1. Remove the six screws that
secure the top cover of the CPU Box.
Gyro
Unit
Step 2. Orient and mount the Gyro unit as shown in the
picture.
Step 3. Fasten the six screws (Torque 5 Inch-Pound)
that secure the top cover of the CPU Box.
Vehicle’s Floor
CPU Box Front Panel
Figure 31
GPS Dead Reckoning - Vertical Installation (back panel facing up)