Motorola MW810 - Vertical Installation - Front Panel Facing up

44 MW810 Vehicle Mobile Workstation Installation Manual
Vertical Installation - front panel facing up
Vehicle’s Floor
Step 1. Remove the six screws that secure the top
cover of the CPU Box.
Gyro
Unit
Step 2. Orient and mount the Gyro unit as shown in
the picture.
Step 3. Fasten the six screws (Torque: 5 Inch-Pound)
that secure the top cover of the CPU Box.
CPU Box Front
Figure 30
GPS Dead Reckoning - vertical Installation (front panel facing up)