Motorola MW810 - Turning off the MW810

46 MW810 Mobile Workstation Vehicle Installation Manual
The MW810 Mobile Workstation can be turned OFF by the following method:
1. Press the Power button of the CPU Box or Display to turn OFF the MW810.
2. Turn OFF the ignition switch.
3. Turn OFF the MW810 Mobile Workstation via the OS.
Using the Power Button to Start the MW810
The MW810 Mobile Workstation can be turned ON by the following method:
1. Press the Power button on the CPU Box or Display, regardless of ignition key position.
The MW810 Mobile Workstation can be turned OFF by either one of the following method:
1. Press the Power button of the CPU Box or Display.
2. Turn OFF the MW810 Mobile Workstation via the OS.
Using the Ignition Key to Start the MW810
The MW810 Mobile Workstation can be turned ON by the following method:
1. Turn ON the ignition key. Note that the CPU Box and Display Power buttons are
disa
bled.
The MW810 Mobile Workstation can be turned OFF by either one of the following methods:
1. Turn OFF the ignition key.
Turn OFF the MW810 Mobile Workstation via the OS. Note that in order to turn ON the
MW
8
10, the ignition key should be turned to OFF position, and switched back to ON.
Turning Off the MW810
To turn Off the workstation, press the CPU Box or display Power button momentarily. The
workstation displays the Windows shut-down dialog box. Remember to save important
information before turning OFF the MW810.
The MW810 Mobile Workstation automatically turns OFF as a result of the following events:
• Extreme temperatures
• Discharged vehicle battery
• Pressing the Power button on the CPU Box or display for more than six seconds
In critical conditions or during maintenance, the workstation may be powered OFF by
t
urn
ing the main power switch on the CPU Box back panel.
Turning OFF the main power switch or disconnecting the power cable
when the MW810 Mobile Workstation is running may seriously damage
your operating system or your Hard Disk Drive.
!
Caution