Motorola MW810 - 8.4 Display

14 MW810 Mobile Workstation Vehicle Installation Manual
8.4” Display
The 8.4” Display can be attached to a mount by four M4 screws.
The 8.4” Display supports the following installation methods:
• In-dash DIN Mount
• Free-standing Pedestal Mount
The CPU box to Display cable can be ordered in two basic
configurations with various lengths:
1) Right side driving countries (driver's seat on left-hand side). Seen
from
the front, cable exits to the right away from the driver (see Figure
10).
2) Left side driving countries (driver's seat on right-hand side). Seen
from
the front, cable exits to the left, away from the driver.
7.1”
9.1"
3.93"
3.93"
W 1.7"
Figure 10
8.4” Display Size
Note