49
English
IMPRES Battery Fleet Management System
IMPRES Battery Fleet Management software automatically collects
critical data from IMPRES or IMPRES 2 batteries that are inserted into
an IMPRES charger. The critical data include battery age, capacity,
charge and Calibration/Recondition history, date when manufactured,
and date when put into service. IMPRES Battery Fleet Management
software analyzes battery data, communicates battery health, and
recommends when to replace the battery. As a result, it can quickly
and efficiently determines whether or not to redeploy the battery to a
less demanding user, when to purchase a new replacement battery, or
that a battery is missing.
IMPRES Battery Fleet Management delivers battery-critical
information:
• When batteries are below an acceptable capacity.
• Helps to ensure users have enough capacity for a full work shift.
• Identifies low-capacity batteries so they can be removed from
service.
• Eliminates unexpected downtime and work interruptions.
• Avoids the expense of throwing batteries away prematurely.
• Confirms chargers are optimally distributed and used.
IMPRES Battery Fleet Management consists of three major
components:
1. The application software.
2. A software license key.
3. A USB cable to connect the IMPRES 2 charger to a computer.
The IMPRES Battery Fleet Management application software is
scalable from a single site to a multi-site networked system. The
system can be networked to support up to 25,000 batteries in the same
location or over geographically dispersed areas.
MN003555A01.book Page 49 Wednesday, February 14, 2018 2:40 PM
To Next Page
Loading...
