Motorola PMPN4283 - Securing Charging Pocket to Multi-Unit Charger

54
English
2. Remove the screw that secures the Charging Pocket to the base.
3. Lift the Charging Pocket a few inches away from the base.
4. Remove the Pocket Harness by pulling straight up on the connector
(Refer to Figure 25 and Figure 26).
Securing Charging Pocket to Multi-Unit Charger
Figure 27: Securing HW001384A01/HW001385A01/HW001386A01/
AS000063A01 Charging Pockets to Multi-Unit Charger Base
USB Receptacle
Harness Receptacle
HW001384A01/HW0001385A01/
AS000063A01
HW001386A01
MN003555A01.book Page 54 Wednesday, February 14, 2018 2:40 PM