28
English
GETTING STARTED
SELECT AN LTR CHANNEL/
TALKGROUP
Your PR400 display radio can be programmed
with up to 10 LTR sites and a maximum of 100
talkgroups, in total, across one or more sites
(up to a total of 10 sites).
To select an LTR Channel/Talkgroup:
Note: Site/talkgroup settings are programmed
by your dealer.
SELECT A CONVENTIONAL RADIO
CHANNEL
Your radio offers 32 conventional channels.
To select a channel, turn the Channel
Selector knob clockwise or counterclockwise
until you reach the desired channel.
RECEIVE A CONVENTIONAL OR
LTR CALL
1
Turn the Channel Selector knob to select
the appropriate LTR channel/talkgroup.
–or–
L or M to select the appropriate LTR
channel/talkgroup.
–or–
Press any of the programmable buttons to
access a preprogrammed talkgroup. Then use
either the Channel Selector knob or L
and
M to select the appropriate LTR
channel/talkgroup.
Note: The third option is available only if
your radio has been programmed
with a specified LTR channel/
talkgroup.
1 Turn your radio on.
2 Adjust the radio’s volume (see page 27).
3 Turn the Channel Selector knob to select the
desired conventional channel or LTR
talkgroup,
–or–
L or M to select the desired
conventional channel or LTR talkgroup.
• Make sure the PTT button is released.
02_GetStarted.fm Page 28 Monday, August 16, 2004 3:08 PM
To Next Page
Loading...
