45
English
PHONE
PHONE
Your radio allows you to place and receive
telephone calls through a repeater (depending
on phone line availability).
The phone feature is available in both
conventional and LTR systems.
• D appears on the display when you are in
Phone mode.
ACCESS THE REPEATER
Your dealer/programmer can preprogram your
radio in one of two ways to enter your access/
de-access code to the repeater.
Immediate Auto – your radio will transmit the
access/deaccess code automatically upon
entering phone mode or disconnecting a
phone call. You will hear a series of tones, and
see your access/deaccess code on the display,
indicating that an access/deaccess code is
being sent automatically.
Delayed Auto – your radio will transmit the
access code upon a PTT button press. The de-
access code is sent automatically when you
exit phone mode.
RECEIVE A PHONE CALL D
When a phone call is received, a ringing tone
sounds, alerting you to answer the phone call.
Press the preprogrammed Phone button (see
page 23), and skip to step 6.
– or –
1 Select a channel/talkgroup that has been
programmed for telephone.
2
J to enter menu mode.
3 L or Muntil
4 J to select
Note: The D appears on the display.
5 Press and hold the PTT button to talk. Hold
the radio in a vertical position with the
microphone 1 to 2 inches (2.5 to 5 cm) away
from your mouth. Release the PTT button
when the other party wants to talk, both
parties will need to speak in turn.
6 Disconnect the phone call when the
conversation is completed.
PHONE
PHONE
To Next Page
Loading...
