30
English
GETTING STARTED
TRANSMIT AN LTR CALL TRANSMIT A CONVENTIONAL CALL
1
Turn the Channel Selector knob to select the
appropriate LTR channel/talkgroup.
–or–
L or M to select the appropriate LTR
channel/talkgroup.
2 Hold the microphone in a vertical position at a
distance of about 1 to 2 inches
(2.5 to 5 cm) from your mouth.
3 Press and hold the PTT button.
–or–
Press and release the PTT button and wait 3
seconds.
• If access to the trunked system was
successful, the red LED indicator lights
steady.
• If access to the trunked system was
unsuccessful, the red LED indicator
flashes, indicating that the system was
busy or out-of-range.
4 With the PTT button depressed, speak clearly
into the microphone.
5 Release the PTT button to listen.
1 Turn your radio on.
2 Use the Channel Selector knob to select the
desired channel.
Note: Monitor for traffic before transmitting
to ensure that you do not “talk over”
someone who is already transmitting
3 Hold the radio vertically 1 to 2 inches (2.5 to
5cm) from your mouth. Press the PTT button
to talk.
• The LED indicator lights steady red while
the call is being sent.
4 Release the PTT to listen.
02_GetStarted.fm Page 30 Monday, August 16, 2004 3:08 PM
To Next Page
Loading...
