EasyManua.ls Logo

Motorola PR400 Commercial Series - Repeater or Talkaround J Mode; Call Light (Trunked Operation Only); Repeater or Talkaround Mode

Motorola PR400 Commercial Series
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31
English
GETTING STARTED
CALL LIGHT
(LTR OPERATION ONLY)
The Call Light indicator informs you that you
have received a call from a specified LTR
®
talkgroup (as programmed by your dealer).
The yellow LED indicator will flash
continuously, indicating that a call has been
received.
To turn the call light off:
turn the radio off, then on again, or
change the channel/talkgroup, or
press the PTT button, or
press any valid button.
REPEATER OR TALKAROUND J
MODE
Talkaround Mode enables you to communicate
with another radio when either:
The repeater is not operating.
–or–
Your radio is out of the repeater’s range but
within communicating distance of another
radio.
Note: The J symbol appears on the display
when Talkaround Mode is selected.
To Select either Repeater Mode or
Talkaround Mode
Press the preprogrammed Repeater/
Talkaround button (see page 22) to toggle
between Repeater Mode and Talkaround Mode.
– or –
1
J to enter menu mode.
2 L or M until
3 J to select the current setting.
4 L or M until
-or- until
5 J to select the current setting.
TALKARND
TALKARND
REPEATER
02_GetStarted.fm Page 31 Monday, August 16, 2004 3:08 PM

Table of Contents

Related product manuals