Motorola Pro3100 User Manual

13
English
PHONE
PHONE
If your radio has access to a telephone system,
you can make a phone call. To do this, your
radio must send an access code to a station
that connects it to a phone line. (Ask your dealer
for more details.) After completing a call, your
radio must send a deaccess code to hang up.
MAKING A PHONE CALL
You can make a phone call using the
preprogrammed Phone button (see page 4).
To initiate a phone call (an enhanced keypad
microphone is required):
Note: If you entered the access code using
the keypad, the last number redial
feature will not be available. However, if
the access code was entered
automatically, press the Phone button.
To end a phone call:
1 Press the Phone button.
2 You will hear a series of tones indicating that
an access code is being sent automatically.
–or–
enter your access code using the keypad.
3
When you hear a dial tone, enter the phone
number using the keypad.
–or–
Press and release the preprogrammed Speed
Dial button (see page 4) to use the Speed Dial
feature.
4 Press the key (1 to 8) corresponding to the
number you want to call.
–or–
Press “0” if you want to call the last number
dialed.
1 If your radio has the deaccess code
preprogrammed, proceed to step 2.
–or–
Enter the deaccess code using the keypad.
2 Press the Phone button to exit Phone Mode.
English.book Page 13 Friday, July 23, 1999 1:58 PM

Motorola Pro3100 Specifications

General

Brand	Motorola
Model	Pro3100
Category	Two-Way Radio
Language	English