Motorola PTP 54500 - Redundancy and Alternative Powering Configurations; Figure 5 -PTP 300;500;600 Series Bridge PIDU Plus Power Input; Figure 6 - External DC Supply Only

3 Getting Started
31
The input supply range for the 300/500/600 Series PIDU Plus is 90V-264V AC, 47-63Hz.
Mains connection to the PIDU Plus is made using a standard “figure of eight” mains lead as
shown in Figure 6.
Figure 5 –PTP 300/500/600 Series Bridge PIDU Plus Power Input
3.3.3 Redundancy and Alternative Powering Configurations
NOTE: The use of DC supplies of less than 55v will reduce the usable distance between the
PIDU Plus and ODU.
CAUTION: The maximum distance from the ODU to the connected network equipment is
100m (330 ft) when using 100BaseT.
3.3.3.1 External DC Supply Only
For use where there is no mains supply.
Figure 6 - External DC Supply Only