CPS and Cloning Cables (Optionals)
•
CPS Cable
Both CPS and Cloning cables are made to
work either with RM Series radios or RDX
series. Cloning cable also can work with a
mix of RDX and RM radios.
CPS cable is made to program RM series
radio and you have to make sure the switch
is in "Flash" position. If you want to use the
CPS cable to program an RDX radio, make
sure the switch is in "CPS" position and
attach a USB convertor provided as part of
the CPS cable kit.
•
Cloning cable allows you to clone:
- RM Series, make sure the switch is in
"Cloning" position.
- RDX radios, make sure the switch is in
"Legacy" position one USB convertor in
each side.
- RM and RDX radios, make sure the switch
is in "Legacy" position and use a USB
convertor to connect the RDX SUC.
Cloning cable kit provides 1 USB convertor.
•
Cloning Cable
Micro-to-Mini USB Convertor
To Next Page
Loading...
