Introduction: Specifications 1-9
Military Standards
Applicable MIL–STD MIL 810F Methods/
Procedures
MIL 810G Methods/
Procedures
Low Pressure 500.4/ Procedure II 500.5/ Procedure II
High Temperature 501.4/ Procedure I/Hot,
Procedure II/Hot
501.5/ Procedure I/ A1,
Procedure II/A1
Low Temperature 502.4/ Procedure I/ C1,
Procedure II/ C1
502.5/ Procedure I/ C1,
Procedure II/ C1
Temperature Shock 503.4/ Procedure I 503.5/ Procedure I/C
Solar Radiation 505.4/ Procedure I 505.5/ Procedure I/ A1
Rain 506.4/ Procedure I 506.5/ Procedure I
Dust 510.4/ Procedure I 510.5/ Procedure I
Vibration 514.5/ Procedure I/24 514.6/ Procedure I/24
Shock 516.5/ Procedure IV 516.6/ Procedure IV, VI
Environmental Specifications
Operating Temperature -10 °C to +60 °C
Storage Temperature -30 °C to +70 °C
ESD IEC 61000-4-2
Water & Dust Intrusion IP54
Humidity 8 hour soak @ +50 °C and 95% RH
Salt Fog 8 hours exposure to 5% saline solution
Sodium Chloride (NaCI) at 35 °C, 16 hours
standing period
To Next Page
Loading...
