Disassembly/Reassembly Procedures: Radio Disassembly – Detailed 5-13
5.6.6 LCD Display Disassembly
1. Lift the PCB slightly from the right corner using tweezers as shown in Figure 5-14.
Figure 5-14. LCD display disassembly
2. Remove the main PCB from the front housing by turning it slightly counter-clockwise to release
the PCB retainer catch.
3. Lift the PCB upwards and away from the PCB guide pin as shown in Figure 5-15.
Figure 5-15. Lifting of PCB board
Insert tweezers
Keypad connector
To Next Page
Loading...
