2-2 Test Equipment and Service Aids: Service Aids
2.2 Service Aids
Table 2-2 lists the service aids recommended for working on the radio. While all of these items are
available from Motorola, most are standard workshop equipment items, and any equivalent item
capable of the same performance may be substituted for the item listed.
Table 2-2. Service Aids
Motorola Part
No.
Description Application
25-124330-01R Portable Programming Cable Cable connects the radio to a USB port for radio
programming and data applications.
28012039001 RF Antenna Adaptor Adapts radio’s antenna port to test equipment.
07012042001 RF Antenna Adaptor Holder Holds the RF antenna adaptor.
PMNN4429_ Battery Eliminator Connects to radio via battery eliminator cable.
GMVN5141_ MOTOTRBO CPS, Tuner, and
AirTracer Applications CD
CPS allows Dealers/Distributors to program radio
parameters. Tuner allows to tune and test
MOTOTRBO subscriber, repeater and base station
products in the available systems.
GMVN5520_ MOTOTRBO RDAC CD RDAC allows system technicians to remotely moni-
tor the status of the radio and gather real-time radio
hardware failure reports via alarm messages
reported by the radio.
To Next Page
Loading...
