Disassembly/Reassembly Procedures: Radio Reassembly – Detailed 5-15
7. Remove the display retainer by sliding it upwards to clear the PCB retainer catch.
8. Remove the LCD display as shown in Figure 5-18.
Figure 5-18. LCD display removal
5.7 Radio Reassembly – Detailed
5.7.1 LCD Display Reassembly
1. Insert the LCD display.
2. Insert the display retainer slightly higher than the display module and slide it to fit below the PCB
retainer catch as shown in Figure 5-19.
Figure 5-19. LCD display reassembly
To Next Page
Loading...
