Motorola SL4000 - 5.7.3 PCB Reassembly

5-18 Disassembly/Reassembly Procedures: Radio Reassembly – Detailed
2. Attach the audio jack flex connector and keypad flex connector to the main board as shown in
Figure 5-24.
Figure 5-24. Audio jack flex connector and keypad connector reassembly
5.7.3 PCB Reassembly
1. Insert the interface board into the front housing by sliding it under the PCB retainer catch as
shown in Figure 5-25
Figure 5-25. Interface board reassembly
Audio jack flex
Keypad connector
Front
Housing