Motorola SL4000 - 5.7.4 Internal Antenna Reassembly

Disassembly/Reassembly Procedures: Radio Reassembly – Detailed 5-19
2. Attach the board flex cable to the main board connector and secure it by latching the flex
connector tab.
3. Plug in the coax cable connector to the main board as shown in Figure 5-26.
Figure 5-26. Board flex reassembly
5.7.4 Internal Antenna Reassembly
1. Insert the internal antenna by using tweezers as shown in Figure 5-27.
Figure 5-27. Internal antenna reassembly
Flex connector
tab
Coax cable connector
Board flex
Internal antenna