ITEM PART NO. DESCRIPTION
1. RPX-4719A RADIO SERVICE SOFTWARE LICENSING AND INFORMATION PACKAGE. Identifies
software license information necessary to purchase Radio Service Software listed below
and lists the available radio service software.
2. RVN-4000 RADIO SERVICE SOFTWARE (on 3 1/2" disc)
RVN-4001 RADIO SERVICE SOFTWARE (on 5 1/4" disc) For programming and servicing Spectra radios
on IBM PC, PC-XT, or PC-AT computers equipped as follows: IBM DOS 3.1 or higher, an
RS232 Asynchronous Serial Communications Adapter, and 640k byte (min.) RAM memory,
Includes users manual 68P80101W48.
3. RLN-4008 RADIO INTERFACE BOX (RIB). Shifts voltage level to enable communications between the
radio and the computer’s RS232 Serial Communications Adapter. (Replaces 01-80353A74)
4. 30-80369B71 IBM PC-XT COMPUTER INTERFACE CABLE
30-80369B72 IBM PC-AT COMPUTER INTERFACE CABLE. Connects the appropriate computer’s RS232
Asynchronous Serial Communications Adapter to the Radio Interface Box. IBM PC and PC-XT
computers use a 25-pin connector cable and PC-AT computers use a 9-pin connector cable.
5. 30-80369B73 Spectra RADIO INTERFACE CABLE. Connects the Spectra radio to the Radio Interface Box.
SERVICE MANUALS
68P80101W33 Spectra DETAILED SERVICE INFORMATION. (Early Versions)
68P80102W61 Spectra DETAILED SERVICE INFORMATION. (Latest Version)
68P81070C85 Spectra RADIO INSTALLATION MANUAL.
68P80102W71 MCT-3600/MCT-4800 RADIO INSTALLATION MANUAL.
68P81070C95 Spectra VHF RADIO SERVICE MANUAL.
68P81071C05 Spectra UHF RADIO SERVICE MANUAL.
68P81074C40 Spectra 900 MHz RADIO SERVICE MANUAL.
68P80102W33 Spectra SECURENET SERVICE SUPPLEMENT.
68P80102W48 Spectra HHCH (A3 MODEL) SERVICE SUPPLEMENT.
68P81074C45 Spectra 800 MHz RADIO SERVICE MANUAL.
68P80102W85 MCT-3600 (NYCTA) SERVICE SUPPLEMENT.
68P81071C55 OPERATORS INSTRUCTIONS
SERVICE TOOLS
1. RSX-4057A SURFACE MOUNTED COMPONENT/IC REMOVAL/REWORK STATION. Used to replace
leadless components and IC’s, providing precision-controlled spot heating for fast and
easy repairs.
2. RPX-4725B COMMAND AND CONTROL SERVICE CABLE KIT. Provides all the necessary board-
extension cables for servicing digital and analog modules of the Spectra radios.
01-80300B09 MLM EXTENDER BOARD (p/o RPX-4725B). For servicing Memory Boards in current models.
3. RPX-4724B RF SERVICE CABLE KIT. Provides all necessary cables for servicing the RF modules of the
Spectra radio.
4. 58-80367B21 MINI UHF MALE TO ‘N’ FEMALE ADAPTER.
5. 58-80367B22 MINI UHF MALE TO UHF FEMALE ADAPTER.
6. 28-84606M01 CRIMP-ON MINI UHF ANTENNA CONNECTOR.
7. 66-80388A26 CRIMPING TOOL FOR MINI UHF ANTENNA CONNECTOR.
8. RSX-4044A ADJUSTABLE TORQUE DRIVER WITH BITS.
9. 66-80163F01 INSERTION AND EXTRACTION TOOL. For installing and removing wires from accessory
connector.
10. 01-80320B16 MAGNETIC SCREWDRIVER SET.
11. 01-80370B87 L-SHAPED METRIC HEX KEY.
12. SLN-6435A audio isolation transformer. Required for all audio measurements. Audio PA output floats
and must NOT be grounded.
13. 01-80359A53 SERVICE CABLE (A3 Models Only). For servicing Interface Board.
14. TRN-7111 KEY VARIABLE LOADER CABLE ADAPTER. Required for loading cipher keys into the
Spectra SECURENET Mobile Radio. (A TKN8351 or TKN8531 cable is also required.)
RPX-4724B RF SERVICE CABLE KIT. Interface cables needed to service the RF modules of the Spectra
radio. Kit components are:
1. 28-84606M01 Mini UHF connector (Male) for coax cable termination to radio. Adapts any coax of appropriate
size (RG58 or equivalent) for mating to antenna connector.
2. 30-80373B25 RX injection board output cable. Connects to the RX injection output of the VCO assembly for
testing RX injection level (900 MHz models only).
3. 30-80373B26 BNC male to SMB male cable to mate to PCB-mounted SMB female connectors.
4. 30-80373B41 BNC female to Taiko-Denki male cable to mate to PCB-mounted Taiko-Denki female
connectors.
xix
SPECTRA RADIO SERVICE AIDS
To Next Page
Loading...
