Quick Reference Guide 13
Transmitting Bar Code Data to Host
Transferring Data from a Batch Scanner
The BarcodeFile.txt file within the \Scanned
Barcodes directory on the scanner stores
scanned bar code data. Connect the scanner
to the host PC via USB host cable or the
charging cradle and use Windows Explorer to
navigate to the scanner. Copy the bar code
data file to the host.
To clear the bar code data, delete the
BarcodeFile.txt file from the scanner, or scan
the
Clear Data bar code.
Transferring Data from an RF Scanner
When the scanner is paired to a host via
Bluetooth, data transmits to the host after each
scan and is not stored on the device.
Note The scanner also supports an
autorun feature where the customer
can build an autorun.inf file to
automatically copy the data to the
host upon connection.
To Next Page
Loading...
Need help?
General
