Quick Reference Guide 19
Batteries
Battery Information
Motorola/Symbol rechargeable battery packs are designed and
constructed to the highest standards within the industry.
However, there are limitations to how long a battery can operate
or be stored before needing replacement. Many factors affect the
actual life cycle of a battery pack, such as heat, cold, harsh
environmental conditions and severe drops.
When batteries are stored over six (6) months, some irreversible
deterioration in overall battery quality may occur. Store batteries
at half of full charge in a dry, cool place, removed from the
equipment to prevent loss of capacity, rusting of metallic parts
and electrolyte leakage. When storing batteries for one year or
longer, the charge level should be verified at least once a year
and charged to half of full charge.
Replace the battery when a significant loss of run time is
detected.
Standard warranty period for all Symbol batteries is 30 days,
regardless if the battery was purchased separately or included as
part of the mobile computer or bar code scanner. For more
information on Symbol batteries, please visit:
http:/mysymbolcare.symbol.com/battery/batbasics1.html
Battery Safety Guidelines
• The area in which the units are charged should be clear of
debris and combustible materials or chemicals. Particular care
should be taken where the device is charged in a non
commercial environment.
• Follow battery usage, storage, and charging guidelines found
in the user's guide.
• Improper battery use may result in a fire, explosion, or other
hazard.
• To charge the mobile device battery, the battery and charger
temperatures must be between +32 ºF and +113 ºF (0 ºC and
+45 ºC)
• Do not use incompatible batteries and chargers. Use of an
incompatible battery or charger may present a risk of fire,
explosion, leakage, or other hazard. If you have any questions
about the compatibility of a battery or a charger, contact
Motorola Enterprise Mobility support.
• For devices that utilize a USB port as a charging source, the
device shall only be connected to products that bear the
USB-IF logo or have completed the USB-IF compliance
program.
• Do not disassemble or open, crush, bend or deform, puncture,
or shred.
To Next Page
Loading...
Need help?
General
