Motorola Symbol LS1203 Quick Reference Guide

8 Symbol LS1203
Beeper Definitions
The scanner issues different beep
sequences and patterns to indicate status.
The table below defines beep sequences
that occur during both normal scanning and
while programming the scanner.
NOTE For detailed
troubleshooting, refer to the
Symbol LS1203 Product
Reference Guide, p/n
72E-73953-xx.
Beeper
Sequence
Indication
Standard Use
Low/medium/high
beep
Power up.
Short high beep A bar code symbol was
decoded (if decode beeper
is enabled).
4 long low beeps A transmission error was
detected in a scanned
symbol. The data is
ignored. This occurs if a
unit is not properly
configured. Check option
setting.
5 low beeps Conversion or format
error.
Low/high/low
beep
ADF transmit error.
High/high/high/
low beep
RS-232 receive error.
Parameter Menu Scanning
Short high beep Correct entry scanned or
correct menu sequence
performed.

Motorola Symbol LS1203 Specifications

General

Brand	Motorola
Model	Symbol LS1203
Category	Barcode Reader
Language	English