LCD Module , Main
LCD Module , Main
Lens
Lens
and CLI Lens
and CLI Lens
Disassembly
Disassembly
1. Using a T-Driver with a T-7 bit, remove the 4
screws from the LCD Module and then
disassemble LCD Module from Flip Main
Housing.
2. Using your thumb , apply firm even pressure to
the top inside area of the display lens to
separate it from the Flip Main Housing.
3. Using bezel stick pull up the CLI Lens from
Top Area , following the Picture.
36
MIC and MIC Boot
MIC and MIC Boot
Disassembly
Disassembly
1. First, Pull off the MIC Boot .
2. Using bezel stick , put it under the MIC ,
following the Picture.
3. Using thumb, pull up the MIC from Personality
PCB
To Next Page
Loading...
