58
Motorola Confdential Proprietary
Test Procedures
CDMA Transmitter Power Range Test
CDMA TRANSMITTER POWER RANGE TEST
dBm
Meas Cntl
Closed Loop
Pwr Cntl
Closed Loop
Steps
50
Sctr A Pwr
To Screen
CDMA
CALL CNT L
Analog
RX TES T
Config
PRNT CNFG
1.54
-75.0
dBm / BW
Avg Power
Drop Timer
On / Off
Max Power
25.46
dBm
Min Power
-54.42
dBm
Ideal Mobile Power: 1.6 dBm
Execute
Change
n down
Execute
Traffic
Data Mode
Svc Opt 2
Data Rate
Full
Power Meas
Zero
Traffic
-15.6
dB
Atten Hold
On / Off
Select Execute
The ability to do min/max power
measurements just by selecting
Execute is another advanced
feature of the HP 8924C. In this
screen you can also control and
test each power step while
comparing Ideal Mobile Power
to actual Avg Power measure-
ments.
1.Go to the CDMA Transmitter Power Range Test
screen (press the blue Shift key and then the
Range key).
2.Now execute the min/max power measure-
ment (use the knob and select execute under
the min/max power field).
3.You will also notice in this screen you can
select closed-loop power control to manually
control power settings of the phone. Note: If
“always down” is selected, the phone will step
its power down until the call is lost. If power
control is changed, be sure to return it to
“closed-loop” before proceeding onto the next
test.
To Next Page
Loading...
