53
Motorola ConÞdential Proprietary
Test Procedures
CDMA T720
Making a CDMA Phone Call
Press the front panel “CALL” key to
initiate a CDMA call.
Answer the call on the CDMA Phone.
Then speak into the phone and wait to
hear your voice echoed back to you by
the HP8924C.
Each light activates as the call
processing proceeds.
The “Connected” light indicates that
the call was successfully completed.
1.Press the HP 8924C’s CALL button.
2.Notice the call status indicators are activated
at each step in the call process. First the PAGE
indicator activates when the HP 8924C sends
out a page message on its paging channel.
When the mobile answers with an access
probe, the access probe indicator is activated.
3.The phone will now ring, or indicate on its
display there is an incoming call.
4.To complete the call, press the send key on the
phone. The connected indicator should now
be on. When the HP 8924C receives an
acknowledgment from the phone that the
traffic channel connection process is
completed, the connected indicator is acti-
vated.
Call S tatus
Transmitting
Register ing
Pa ge S ent
Access Probe
Connected
Softer Handoff
Hard Handoff
CDMA CALL CONTROL
CALL ANS
E ND
CALL
To Next Page
Loading...
