Motorola TIMEPORT - Turning Your Phone On; Sending a Call; About Your Phone

Getting Started
22
Turning Your Phone On
Sending a Call
To call a number, your phone must be turned on, be unlocked,
and have a network connection with adequate signal strength.
Do This To
1
Press and hold the
power key
turn on your phone
2 If necessary, enter
your four-digit unlock
code and press
OK (+)
unlock your phone
The unlock code is originally set
to 1234. Your service provider
may change this number before
you receive your phone.
Do This To
1
Extend the antenna optimize signal reception
2 Press the keypad keys dial the phone number (up to 32
digits)
Tip: If you make a mistake, press
DELETE (-) to delete the last
digit, or press and hold
DELETE (-) to clear all digits.
Power
key