Motorola TIMEPORT - Page 51

49
Entering Text
General Text Entry Rules
Use the keypad to enter letters, numbers, symbols, and other
characters with the tap method. Press the same key repeatedly
to cycle through available characters (see the “Character Chart”
on page 50):
Msg:
CANCEL BROWSE
Press navigation
key left or right
to move flashing
cursor to the
left or right in
text message.
Press navigation
key up or down
to move flashing
cursor up or
down one line
in text message,
or change
character in
block cursor to
uppercase or
lowercase.
Press a number
key to enter text
at flashing cursor
location.
Press a number
key as many times
as necessary to
enter the desired
character.
Press and hold
a number key to
switch between
tap method and
numeric text
entry mode.