Disassembly V171
23 August 1, 2004
Removing and Replacing the Transceiver Shielding
1. Remove the transceiver board as described earlier.
2. Gently pry the transceiver shielding away from the transceiver board as shown in Figure
17.
Figure 17. Removing the transceiver shielding
3. To replace it, mount the transceiver shielding case over the transceiver board.
4. Restore the transceiver board and other parts.
Removing and Replacing the Microphone
1. Remove the transceiver board as described earlier.
2. Gently pry the microphone away from the transceiver board as shown in Figure 18.
Figure 18. Removing the microphone
To Next Page
Loading...
