Why is the vibrator not working on my Motorola V3 Cell Phone?
If the vibrator feature on your Motorola Cell Phone is not functioning, it indicates that the transceiver board assembly is defective.
General| Network | GSM 850 / 900 / 1800 / 1900 |
|---|---|
| Display | TFT, 256K colors |
| Resolution | 176 x 220 pixels |
| Talk Time | Up to 7 h |
| Dimensions | 98 x 53 x 13.9 mm |
| Weight | 95 g |
| Secondary Display | CSTN, 96 x 80 pixels |
| Camera | VGA |
| Battery | Li-Ion 680 mAh battery |
| Bluetooth | Yes |
| USB | Yes |
| Colors | Silver, Black, Pink, Blue |
| Model | Motorola V3 |
Step-by-step guide for battery door and battery removal.
Instructions for SIM and memory card replacement.
Procedure for removing and replacing the rear housing.
Steps to remove and replace the phone's antenna.
Procedure for replacing the transceiver board assembly.
Instructions for removing and replacing the flip cover.
Steps for removing and replacing the camera module.
Procedure for removing and replacing the display module.
Lists common symptoms, causes, and remedies for issues.
To Next Page
