136
Programming Instructions
Follow this procedure if you need to program your phone’s
phone number.
Note: Programming is normally done by a trained technician at
the site of purchase. Users should not make changes other than
ones in the following procedure.
Before programming, ask your service provider for your:
• 10-digit MIN (Mobile Identification Number)
• Carrier System ID (a one- to five-digit number)
Press To
1
#, the Carrier System ID number,
#, *, N
enter programming
mode
2
0, 0, 0, 0, 0, 0
(this is the security code that is in
the phone when it is shipped from
the factory)
enter the security
code
3
OK (+) submit the security
code
4
S
scroll to MIN
5
CHANGE (+) open the MIN
display
6
keypad keys for the 10-digit MIN enter the new MIN
7
OK (+) store the new MIN
8
DONE (-) exit programming
mode
To Next Page
Loading...
