33
Sending and Receiving Calls
When automatic redial is turned off, you can manually activate
the feature to redial a phone number. When you hear a busy
signal and see the Call Failed message:
Caller ID
The
calling line identification
(caller ID) feature lets
you see who is calling before you answer.
• If the caller’s name is stored in your phonebook, the phone
automatically displays the name. Otherwise, the phone
displays the caller’s phone number.
• If caller ID information is not available, your phone displays
the message
Incoming Call.
Talk Secure
When
talk secure
is activated, your phone always tries to use a
high-security connection to prevent others from intercepting
your calls. To activate the secure connection feature, see
“Activating Talk Secure” on page 128.
Note: If a high-security connection is not available, your phone
uses a standard connection. Your phone displays the message
Line Not Secure when using a standard connection, unless
caller ID or other information already fills the display.
Press To
N or RETRY (+)
activate automatic redial
To Next Page
Loading...
