Motorola V60 - Using the Menu System; Menu Navigation and Selection

49
Entering Text
General Text Entry Rules
Use the keypad to enter letters, numbers, symbols, and other
characters with the tap method. Press the same key repeatedly
to cycle through available characters (see the “Character Chart”
on page 50):
Msg:
CANCEL)
) BROWSE
Move flashing
cursor to the
left or right in
text message.
Move flashing
cursor up or
down one line
in text message,
or change
character in
block cursor
to uppercase
or lowercase.
Press a number
key to enter text
at flashing cursor
location.
Press a number
key as many times
as necessary to
enter the desired
character.
Press and hold
a number key to
switch between
tap method and
numeric text
entry mode.