June 22, 2006 25
Level 1-2 Service Manual Disassembly
PRELIMINARY
4. Push the Case D forward to release Case C & D and remove Housing D in Figure 10.
5. To replace, align the lower housing cover to the phone. Press the lower housing cover into
place, allowing the housing latches on each side of the phone to snap into position.
6. Use 4 screws(T5) to fasten the lower housing cover to the front housing cover with 9 Ncm
torque moment.
7. Replace the battery and battery door as described in the procedures.
Figure 10. Removing the Lower Housing Cover
1
2
To Next Page
Loading...
