30 June 22, 2006
Disassembly W220
PRELIMINARY
Removing and Replacing the Antenna Carrier
1. Remove the battery door, battery, lower housing cover and lower PCB as described in the
procedures.
2. Lift the antenna carrier from the Main PCBA by tweezers as shown in Figure 18.
3. To replace, align the position holes on antenna carrier onto the lower phone case.
4. Replace the PCBA, lower housing cover, battery, and battery door as described in the
procedures.
Removing and Replacing the Speaker Box
1. Remove the battery door, battery, lower housing cover, lower PCB, antenna carrier as
described in the procedures.
2. Remove the Speaker Box from the Main PCBA as shown in Figure 19.
Figure 18. Removing the Antenna Carrier
Figure 19. Removing the Speaker Box
Press the hook
To Next Page
Loading...
