Chapter 12
Menu
You are able to access the menu through the Menu/Programmable button.
The following are the available features in the Menu.
Table 6: List of Features
Feature Description
All Alert Tones Allows you to enable and disable All Alert Tones.
Display Brightness Allows you to adjust the display brightness on your radio.
Voice Announcements Allows you to enable and disable the Voice Announcements.
Do Not Disturb (DND) Allows you to change the mode of your radio from available to
"do not disturb".
NOTE: When DND is enabled, you will not be able to
receive any group call, quick group call, or private call.
Scan Allows you to enable and disable the Scan feature.
Location Allows you to enable and disable the Global Positioning System
(GPS) feature.
Wi-Fi Allows you to enable and disable the Wi-Fi modems.
Cellular Allows you to enable and disable the Cellular modems.
Bluetooth Allows you to enable and disable the Bluetooth.
12.1
Do Not Disturb
Do Not Disturb (DND) allows you to change the status of the radio from available to unavailable.
When DND is enabled, an LED blinks and you will not be able to receive any private call. A negative
tone sounds when a call is initiatited to indicate that the call cannot be connected.
12.1.1
Turning DND On or Off
NOTE: Depending on the configuration of your radio, press or press and hold the Menu/
Programmable button to directly access the feature. Else, manually enter the feature with the
following procedure.
Procedure:
1 Press the Menu/Programmable button.
2 Locate the Do Not Disturb (DND) icon.
3 To turn on DND, press the Volume Up button. To turn off, press the Volume Down button.
If DND is on, the following occurs:
• Voice Announcement sounds Do Not Disturb On.
MN005173A01-AD
Chapter 12 : Menu
32
To Next Page
Loading...
