Motorola WAVE TLK 100 - Do Not Disturb; DND Functionality

12.6
Turning Wi-Fi On or Off
NOTE: Depending on the configuration of your radio, press or press and hold the Menu/
Programmable button to directly access the feature. Else, manually enter the feature with the
following procedure.
Procedure:
1 Press the Menu/Programmable button.
2 Locate the Wi-Fi icon.
3 To turn on Wi-Fi, press the Volume Up button. To turn off, press the Volume Down button.
If Wi-Fi is on, the following occurs:
• Voice Announcement sounds Wi-Fi On.
• The display shows a check mark beside the Wi-Fi icon.
If Wi-Fi is off, the following occurs:
• Voice Announcement sounds Wi-Fi Off.
• The display shows an "X" mark beside the Wi-Fi icon.
12.7
Turning Radio Cellular On or Off
NOTE: Depending on the configuration of your radio, press or press and hold the Menu/
Programmable button to directly access the feature. Else, manually enter the feature with the
following procedure.
Procedure:
1 Press the Menu/Programmable button.
2 Locate the Cellular icon.
3 To turn on Cellular, press the Volume Up button. To turn off, press the Volume Down button.
If Cellular is on, the following occurs:
• Voice Announcement sounds Cellular On.
• The display shows a check mark beside the Cellular icon.
If Cellular is off, the following occurs:
• Voice Announcement sounds Cellular Off.
• The display shows an "X" mark beside the Cellular icon.
12.8
Bluetooth
This feature allows you to use your radio with a Bluetooth-enabled accessory through a Bluetooth
connection. Your radio supports both Motorola Solutions and Commercially available Off-The-Shelf
(COTS) Bluetooth-enabled accessory.
Bluetooth operates within a range of 10 m (32 ft) line of sight. This is an unobstructed path between
your radio and your Bluetooth-enabled accessory. For high degree of reliability, Motorola Solutions
recommends to not separate the radio and the accessory.
MN005173A01-AD
Chapter 12 : Menu
35